Posted by on January 11, 2013 at 11:29:17:
Computers and Internet 电脑网络
- No:10490 An Idea:
If you can get into SimplePass, do so and get it backed up you need to make sure you have your web cards backed up. (I can help if you don't know how to do that.)
After you get SimplePass backed up, remove it.
Then, clean your registry. If you don't have a registry cleaner, CCleaner is a good one, else find and use one of your choice.
Reboot, even if you are not told to do so. Windows likes it when we reboot.
Next:
You could upgrade to HP SimplePass 2012.
As well, uninstall and reinstall your Validity driver with the latest.
SimplePass 5.3.1.7amp;#65279
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob987071&cc=us&dlc=en&lc=en&...
Validity Sensor 4.3.205.0
ftp://ftp.hp.com/pub/softpaq/sp5300153500/sp53369.exe 15:55:17 18/01/13
Link:
- No:10489 tplink router:
window 7 can access internet but not xp
reset router by cable connect
HTTP://TPLINKLOGIN.NET id and password= admin
change the WPA2PSK TO WPAPSK....ok 15:30:58 18/01/13
Link:
- No:10451 出现igfxtraywindow:igfxtray.exe应用程序错误的提示有内容为oxooc3eeoo指令引用的oxooac3098内存。该内存不能为reed.要终止程序,
原因:因为系统中有未注册的dll文件
必须注册所有dll文件,才能解决内存不能为read等问题
系统dll文件没有注册,可能引起各种各样不可知的问题,比如无法打开二级链接,经常出现“内存不能为read或written”等错误。如何一下把所有的dll文件重新注册一遍呢?
1.点击:开始运行,在运行框中输入cmd,在命令提示符下输入:
for %1 in (%windir%\system32\*.dll) do regsvr32.exe /s %1
注意,是在命令提示符下,不是在“运行框”中!!
注:可能会需要等待一段时间。。。
另种原因:你现将内存拔下来用橡皮擦一下金手指,再插上试一下,如果是接触不良就应该恢复正常,要是内存本身坏了,拿到商家那里也是出问题。
你现用一根试,在换另一根 11:58:12 11/01/13
Link:
- No:10450 请打开开始菜单运行Msconfig,是个系统配置实用程序,里面有启动页面,在里面吧这两个程序前面的对号去掉,重启msconfig会自己运行,把左下边的不再显示点上,关闭即可。 11:34:24 11/01/13
Link:
- No:10449 igfxtray.exe is a process which allows you to access the Intel Graphics configuration and diagnostic application for the Intel 810 series graphics chipset. It can be disabled loading it via msconfig or you can reinstall your intel graphics driver to fix the problem.It is a nonessential system process, and is installed for ease of use via the desktop tray. 11:31:02 11/01/13
Link: